SMW High-speed Mill

SMW High-speed mill 1.Introduction The SMW series mill is mainly used in recycling thermoforming PVC, PE, etc. By way of practice in plastic industry, it is proved that this series of mill can maintain the target in the side of physical and chemical features when adding 20% to 30%calcium carbonate, and the capacity can reach 120 280kg/h(40 80meshes). So the machine is best choice for plastic machinery company to solve problem of waste plastic material, at the same time the machine is low in energy consumption so that save your cost.Besides, this series of mill is environment-friendly. The following picture is the frame of the whole set of machine. It contains 12 parts, they are: electrical box, machine frame, motor, mainframe, automatic discharging device, feeding hopper, straight duct, whirlwind material-collecting hopper, close blower, blower, dust catcher, dust-collecting bag.2.Main technical standards of SMW500: 1. Quantity of blade tray: 1, the outer diameter is 483mm±1mm2. Gear board: I set; contain 12 pcs, made of high-quality alloy steel, rigidity is 55-58.3. Blade: 24 pcs, made of high-quality alloy steel, rigidity is 52-55.4. Rotating speed of main motor: 2950r/min5. Main motor power: 37kw. Matched triangle strap, B type, 2007mm6. Leading blower: model9-19, 4#, motor is 3kw7. Close blower: model ZGF, motor is 0.75kw8. Capacity: PVC 200 280kg/h (30-60meshes)9. PE in high density 60 150kg/h (30-80meshes)Capacity depends on size of the raw material, which you want to grind.10. Dimension of the machine: (length*width*height) 5900×1450×2900mm11. Weight of the whole set of machine: 1200kg